INFLUENCE OF BASIC PROCESS PARAMETERS ON MECHANICAL AND INTERNAL PROPERTIES OF 316L STEEL IN SLM PROCESS FOR RENISHAW AM400

Abstract

The paper deals with the study and experimental evaluation of the influence of process parameters determining the resulting mechanical properties of the components after additive production using the 1.4404 (316L) stainless steel SLM method. The determining process parameters that have been investigated are laser power, scanning speed and layer creation strategy. These parameters fundamentally affect the microstructure and macrostructure of components created by the SLM method, therefore, they have been subjected to closer examination. The results then determined the ideal set of parameters according to the assessment criteria - tensile test, porosity and roughness of the surface. Experiments were performed on the Renishaw AM400 and therefore the results and recommendations are directly related to this particular machine.

Recommended articles

AN ACTIVELY CONTROLLED JOURNAL BEARING WITH INCREASED RESISTANCE TO INSTABILITY

Jiri Tuma, Jiri Simek, Miroslav Mahdal, Miroslav Pawlenka, Vaclav Pavelka
Keywords: machining process | proximity probes | active vibration control | piezo-actuators | non-rotating loose bushing | journal bearings

THE INFLUENCE OF RADIATION CROSS-LINKING ON MICRO-INDENTATION CREEP AND THE GEL CONTENT OF POLYAMIDE

Martin Ovsik, Martin Reznicek, Vojtech Senkerik, Michal Stanek, Lenka Hylova
Keywords: gel content | creep | micro-indentation | cross-linking | radiation | Polyamide 6.6

INNOVATION OF ILIZAROV STABILIZATION DEVICE WITH THE DESIGN CHANGES

Filip Tomanec, Sona Rusnakova, Martina Kalova
Keywords: Kirschner | Ilizarov | tibia | glass-fiber composite | external fixator

FDM FOR HIGH TECH CERAMICS ON BASE THE ZIRCONIA IN APPLICATION OF DENTAL CROWNS

Daniel Sida, Vladimir Sida
Keywords: bio application | dental crown | ceramics | 3D printing | FDC | zirconia