INNOVATION OF ILIZAROV STABILIZATION DEVICE WITH THE DESIGN CHANGES

  • 1Tomas Bata University in Zlín, Faculty of Technology, Department of Production Engineering, Zlín, CZ
  • 2Faculty of Metallurgy and Materials Engineering, VSB – Technical University of Ostrava, Ostrava, CZ

Abstract

An application of the osteosynthesis fixator as a surgical method for the large bone treatment has been deeply described during the last 70 years [Solomin 2012]. Even the design using composite material is available at the market. Nevertheless, the interconnection of the main requirements including lightweight, adequate stiffness and adjustability around the tibia bone is the next step in external fixator improvement. Thus, the overall aim of this study is the innovation of this device with the subsequent analytical verification using finite element method. Due to these requirements, innovative external fixator has been developed and further optimized with structural analysis and surgeons´ requirements as well. The final improved design of osteosynthesis device with the analytical confirmation using finite element method has been manufactured and this state of the art further serve for experimental verification.

Recommended articles

THE INFLUENCE OF RADIATION CROSS-LINKING ON MICRO-INDENTATION CREEP AND THE GEL CONTENT OF POLYAMIDE

Martin Ovsik, Martin Reznicek, Vojtech Senkerik, Michal Stanek, Lenka Hylova
Keywords: gel content | creep | micro-indentation | cross-linking | radiation | Polyamide 6.6

DEVELOPMENT AND SPECIFICS OF THE CONSTRUCTION OF A LKMK 8000 LARGE CRANK PRESS

Milan Cechura, Martin Volejnicek
Keywords: optimization | forming force | die forging | forging press

AN ACTIVELY CONTROLLED JOURNAL BEARING WITH INCREASED RESISTANCE TO INSTABILITY

Jiri Tuma, Jiri Simek, Miroslav Mahdal, Miroslav Pawlenka, Vaclav Pavelka
Keywords: machining process | proximity probes | active vibration control | piezo-actuators | non-rotating loose bushing | journal bearings

STUDY OF ABS AND SAN FAILURES UNDER DROP-WEIGHT IMPACT TEST

Tomas Fiala, Ales Mizera, Pavel Stoklasek, Miroslav Manas, Lenka Hylova, Martin Bednarik
Keywords: acrylonitrile butadiene styrene and styrene acrylonitrile | failure | drop-weight impact test | mechanical properties