STUDY OF ABS AND SAN FAILURES UNDER DROP-WEIGHT IMPACT TEST

Abstract

Acrylonitrile butadiene styrene (ABS) is a tough material, which is used for engineering purposes (e.g. covers of electronic and engine parts). On the other hand, styrene acrylonitrile (SAN) is a brittle transparent material with good optical properties, it is used for household items, such as bowls and boxes in refrigerators. Both of these materials can be loaded by impact forces, for example, fall of the item on the floor. In this study, the influence of fall height on ABS and SAN samples under a drop-weight impact test is tested. After the test, failures are evaluated as well as maximum impact force and all consumed work, which was used for the deformation and the failure of the material.

Recommended articles

MEASURING GEOMETRIC PARAMETERS OF PROXIMAL FEMUR BY USING REVERSE ENGINEERING

Nguyen Van Tuong
Keywords: CAD | reverse engineering | Vietnamese Patient | Proximal Femur | Total Hip

EXPERIMENTAL SHRINKAGE STUDY OF CERAMIC DLP 3D PRINTED PARTS AFTER FIRING GREEN BODIES IN A KILN

Iaroslav Kovalenko, Yuvaraj Ramachandran, Maryna Garan
Keywords: photopolymer | debinding | SLA | DLP | 3D printing

INNOVATION OF ILIZAROV STABILIZATION DEVICE WITH THE DESIGN CHANGES

Filip Tomanec, Sona Rusnakova, Martina Kalova
Keywords: Kirschner | Ilizarov | tibia | glass-fiber composite | external fixator

INFLUENCE OF THE MATERIAL ON THE ACCURACY OF OPTICAL 3D DIGITALISATION

Radomir Mendricky, Ondrej Langer
Keywords: Digitalisation | Material Effect | Contactless 3D Scanners | Fringe projection sensor | Optical 3D Digitalisation