INNOVATION TESTING OF BENDING OF THE MACHINE-TOOL FRAMES

Abstract

The paper deals with the issue of geometric precision measuring at large parts (especially at castings having big dimensions) in their manufacturing stage. The large parts of machine-tool frames are required to have their geometric tolerances in thousandths of millimetres. The production or cooperation abilities of the particular company must be adapted to these demands and it is also necessary to adapt the company metrological equipment and measuring procedures to them. The standard measuring equipment cannot be used in most cases, because the particular parts are too large. For this reason, it is necessary to search such methods and procedures which enable to perform measuring with the relevant result. It could be considered to use e.g. 3D scanners. Unfortunately, their measuring precision has not reached the required tolerances up to now. For example, the HandyPROBE 3D scanner measures with the precision of 0.022 mm [CMM 2015].

Recommended articles

EXPERIMENTAL EVALUATION ON THE QUALITY OF MACHINED SURFACE AFTER TURNING OF MATERIAL INCONEL 625

TOMAS PROKES, KATERINA MOURALOVA, JIRI KOVAR
Keywords: turning | Inconel 625 | surface quality | box behnken | design of experiment

RISKS IN INDUSTRIAL MANAGEMENT SYSTEMS

LUBOS KOTEK, ALES NOSEK, ALOIS FIALA, VOJTECH BARTOS
Keywords: management systems | risk management | system comparison

RELATIONSHIPS BETWEEN TECHNOLOGICAL AND MATERIAL PARAMETERS DURING DENSIFICATION OF CHERRY TREE SAWDUST

PETER KRIZAN, MILOS MATUS, JURAJ BENIAK
Keywords: biomass | densification | briquetting machine | briquettes density | compression pressure | particle size | moisture content

DESIGNING A COMPACT DUAL HEAD FOR FLM 3D PRINTING TECHNOLOGY

PETR KELLER
Keywords: FLM | FDM | 3D printing | dual head | design