TECHNOLOGY FOR LOW-TEMPERATURE THERMOCHEMICAL CONVERSION OF BIOMASS

Abstract

The paper describes a modern technology of biomass lowtemperature thermochemical conversion for production of biogenic fuels in gaseous, liquid and solid phases. The equipment which was acquired during the life of the project "Building Research Centre AgroBioTech", ITMS code: 26220220180, allows carrying out long-term experiments in pilot conditions. As an example of the high efficiency of the biomass conversion we present results of experiments with the use of agro pellets, while using the dose input of 63 kg/h a highly energy valuable synthesis gas with the average flow rate of 10 m3/h, liquid component - reactor oil in the volume of 20l/h, and the solids - carbon in the amount of 21 kg/h was obtained.

Recommended articles

DESIGNING A COMPACT DUAL HEAD FOR FLM 3D PRINTING TECHNOLOGY

PETR KELLER
Keywords: design | dual head | 3D printing | FDM | FLM

EXPERIMENTAL EVALUATION ON THE QUALITY OF MACHINED SURFACE AFTER TURNING OF MATERIAL INCONEL 625

TOMAS PROKES, KATERINA MOURALOVA, JIRI KOVAR
Keywords: design of experiment | box behnken | surface quality | Inconel 625 | turning

MECHANICAL PROPERTIES OF POWDER CoCrW-ALLOY PREPARED BY AM TECHNOLOGY

ALICA FEDORIKOVA, RADOVAN HUDAK, JOZEF ZIVCAK, ROBERT BIDULSKY, PATRIK PETROUSEK, JANA BIDULSKA, ROBERT KOCISKO, VIKTORIA RAJTUKOVA
Keywords: porosity | mechanical properties | selective laser melting | powder CoCrW-alloy

SURFACE MORPHOLOGY OF IRON-RHODIUM ALLOY AFTER WIRE EDM

KATERINA MOURALOVA, RADIM ZAHRADNICEK, JAN STREJCEK
Keywords: EDX | Analysis of the chemical composition | quality of surface | iron-rhodium alloy | electrical discharge machining | WEDM