MONITORING THE TECHNICAL CONDITION OF THE DEVICE USING THE VIBRATION DIAGNOSTIC METHOD

Abstract

Vibrations are one of the important monitored parameters, which allow acquiring primary information about the operating condition of the device. It is necessary to bear in mind that vibrations of rotating machines are closely linked to the dynamic stress of the parts like bearings or transmissions. The paper is dealing with the issue of monitoring and diagnosing the size of the two based parameters of vibrations, namely speed and vibration acceleration. The experimental section presents the results of the measurement. During the processing, we have measured the size of vibration at four places and the processing was done under varying spindle rotation speed. The conclusion presents recommendations for input factors used during measuring and processing. Here you should describe the paper idea in short.

Recommended articles

NOISE AND STEP HEIGHT PERFORMANCE OF SELECTED OPTICAL SURFACE MEASURING INSTRUMENTS

MATEJ HARCARIK, ROBERT JANKOVYCH
Keywords: step height repeatability | topography measurement noise | comparison of instruments | coherence scanning interferometry | confocal microscopy | surface texture

MECHANICAL PROPERTIES OF HYBRID COMPOSITES BASED ON POLYPROPYLENE MATRIX

MARTIN SEIDL, LUBOS BEHALEK, JIRI HABR
Keywords: mechanical properties | physical foaming agents | hybrid composites | polypropylene | cellulose fibres

DESIGN OF A PROGRAM FOR CALCULATION OF FORCING SPRING STIFFNESS

SLAVKO PAVLENKO
Keywords: parameters | torsion | generation | stress | application

REPRODUCIBILITY OFTHERMAL ERROR BEHAVIOUR IN MACHINE TOOLS FROM THE SAME MODEL TYPE

PETR MINAR, TOMAS GREGOR
Keywords: Compensation | linear regression model | error prediction | thermal behaviour | ambient environment | Machine tool