THE POSSIBILITY OF USING RECYCLED POLYPROPYLENE SUPOL HT345E

Abstract

Exploitation of plastic waste is current issue in part of recycling in this present. Current recycling appears possibility of manufacturing of composite materials WPC (woodplastic composite). While a few decades ago as a plastic matrix used thermosets, currently often is using thermoplastics. The reason among other things is also able recycling these composite materials. The most common example exploitation of plastics is currently PVC, PE and PP. Application of construction thermoplastics (PA, POM, PET) is limited with increased processing temperature, at which there is a degradation of lignin in the wood. The problem of exploitation of thermoplasts in comparison with thermosets is high viscosity of thermoplastic melt and decrease of wettability whit wood sawdust. For this reason is increasing of attention for determine of maximum quantity of filler wooden components.

Recommended articles

SUBSTITUTION OF CEMENT BY MICRO-MILLED RECYCLED CONCRETE IN COLD RECYCLED ASPHALT MIXES

ZUZANA CIZKOVA, JAN VALENTIN
Keywords: cement | moisture susceptibility | cold recycled asphalt pavement | active filler | mechanical activation | recycled concrete | micro-milled concrete

EXPERIMENTAL EVALUATION OF THE QUALITY OF SURFACE AFTER WEDM FOR STEEL X210CR12

KATERINA MOURALOVA, JIRI KOVAR, MILAN KALIVODA, MILAN DVORAK
Keywords: Analysis of the chemical composition | quality of surface | steel X210Cr12 | electrical discharge machining | WEDM

STRENGTH ANALYSIS OF PIN CONNECTIONS USING COMPUTER AIDED SYSTEMS

PETR BERNARDIN, VACLAVA LASOVA, FRANTISEK SEDLACEK
Keywords: permissible stress | strength check | finite element analysis | connection | pin

METHOD OF DETERMINATION OF THE BOUNDARY STRENGTH OF PRESSED SHEETS OF CAR BODIES FOR CATEGORIES TO 1300 CM3

VILIAM CACKO, IVETA ONDEROVA, LUBOMIR SOOS, JURAJ ONDRUSKA, GREGOR IZRAEL
Keywords: non-homogenous material | Grubbs test | steel | car bodies | boundary strength