ANALYSIS OF FINISHING VERY PRECISE HOLES BY THE REAMING HEAD MT3

Abstract

The paper deals with the analysis of the finishing of very precise holes by the applied MT3 reaming head from FINAL Tools Inc. In the case of a narrow range of customers with particularly high demands on the quality of the holes is currently appearing effort to elaborate a detailed evaluation of surface quality through evaluation of surface integrity. These facts led to the design of an experimental part in the form of an analysis of the surface integrity of the test holes machined by the reaming head MT3 during its durability. Surface integrity was assessed from the point of view of circularity, cylindricality, surface roughness, surface defects controlled by electron microscopy, microhardness and metallographic analysis of lateral extrusion. For the completeness of the measured parameters, the dimension of the reamed test holes was also measured.

Recommended articles

MEASURING OF ROTARY AIR MOTORS CHARACTERISTICS

LUKAS DVORAK, KAMIL FOJTASEK
Keywords: mathematical model | measurement | air motor

EXPERIMENTAL TESTING OF POWER ASSISTED STEERING

PETR NOSKIEVIC, MARTIN BREZINA
Keywords: Simulation | mathematical model | hydraulic drive | power assisted steering

EXPERIMENTAL EVALUATION OF SYSTEM EFFICIENCY FOR A HYDRAULIC HYBRID ARCHITECTURE OF EXCAVATORS

SEIJI HIJIKATA, PHILIPP WEISHAAR, ROLAND LEIFELD, KATHARINA SCHMITZ
Keywords: excavators | mobile hydraulics | system efficiency | constant pressure | open center | hydraulic hybrid

THEORETICAL AND EXPERIMENTAL ANALYSIS OF THE BEARING JOURNAL MOTION DUE TO FLUID FORCE CAUSED BY THE OIL FILM

JIRI TUMA, MILADA KOZUBKOVA, MIROSLAV PAWLENKA, MIROSLAV MAHDAL, JIRI SIMEK
Keywords: muszynska model | fluid forces | reynolds equation | journal bearings