ACCURACY OF MACHINE TOOLS

  • 1VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of machining, assembly and engineering metrology, Ostrava, SK

Abstract

The accuracy of milling centre geometry is a basic condition for successful application in practice. Users of modern centres have to deal with the issue of measuring accuracy using in the production program. The desired results are achieved by careful preparation both before and during adjustment operations. These rules apply to all applications for new machines, but also to machines after collision or after handling older machines. The geometrical accuracy of the machine begins at the design stage, when the emphasis must be placed on the precision of production of parts and groups with the precise assembly of new machines. Even the best adjustment or alignment of the machine is not valid if the company orders a poor quality machine that does not meet the required characteristics both in design and quality. Such a poorly selected machine guarantees frequent interventions by technicians to ensure at least the minimum required tolerance.

Recommended articles

CONDUCTIVE MATERIAL PROPERTIES FOR FDM ADDITIVE MANUFACTURING

Juraj Beniak, Peter Krizan, Milos Matus
Keywords: tensile strength | fused deposition modelling | 3D printing | additive manufacturing | Conductive material

CUTTING FORCE MODELLING WITH EFFECTS OF CUTTING TOOL GEOMETRY AND TOOL WEAR IN MILLING OF DIN C45 STEEL

Jaroslav Kovalcik, Pavel Zeman, Frantisek Holesovsky, Jan Madl, Ludmila Kucerova
Keywords: C45 steel | tool wear | specific cutting force | cutting force | milling

APPLICATION OF LASER SURFACE POLISHING ON ADDITIVE MANUFACTURED PARTS OF INCONEL 718 NICKEL-BASED SUPERALLOY

Martin Bures, Miroslav Zetek
Keywords: surface roughness | Inconel 718 | Continuous wave régime | Pulsed régime | additive manufacturing | Laser polishing

EXPERIMENTAL SETUP FOR ANALYZING FUNDAMENTALS OF CUTTING PROCESSES USING A MODULAR SYSTEM

Florian Wöste, Jonas Baumann, Jim A. Bergmann, Rafael Garcia Carballo, Petra Wiederkehr
Keywords: modular experimental setup | cutting fundamentals | process dynamics | oblique cutting | orthogonal cutting